Friday, May 12, 2023

Step-by-Step Guide: How to Factory Reset Your iPhone and Restore It to Its Original Settings

 





If you want to factory reset your iPhone without a passcode, there are a few different methods you can try:



Method 1: Use iTunes

  1. Open iTunes and use a USB cord to connect your iPhone to your computer.

  2.  Put your iPhone into recovery mode by swiftly pressing and releasing the Volume Up, Volume Down, and Side buttons on an iPhone 8 or later, and then holding those buttons until the Recovery Mode screen appears. Press and hold the Side and Volume Down buttons simultaneously on an iPhone 7 or 7 Plus until the Recovery Mode screen appears.

  3. iTunes should detect your iPhone in Recovery Mode and prompt you to restore it.

  4. Click on "Restore iPhone" and follow the prompts to complete the restore process.Open iTunes and use a USB cord to connect your iPhone to your computer.



Method 2: Use iCloud

Note: This method requires that you have previously enabled Find My iPhone on your device and that your iPhone is connected to a Wi-Fi or cellular network.

  1. Go to iCloud.com on a computer or another device.

  2. Sign in to your iCloud account using your Apple ID and password.

  3. Click on "Find iPhone" and then select your iPhone from the list of devices.

  4. Click on "Erase iPhone" and follow the prompts to complete the erase process.



Method 3: Use Recovery Mode

To enter recovery mode on an iPhone 8 or later, quickly press and release the volume up and down buttons, then quickly press and release the side button until the recovery mode screen appears. To enter Recovery Mode on an iPhone 7 or 7 Plus, simultaneously press and hold the Side and Volume Down buttons.

  1. Connect your iPhone to your computer using a USB cable and open iTunes.

  2. iTunes should detect your iPhone in Recovery Mode and prompt you to restore it.

  3. Click on "Restore iPhone" and follow the prompts to complete the restore process.

  4. Note: Factory resetting your iPhone will erase all data and settings on the device, so be sure to backup your iPhone data before proceeding with the reset.







Wednesday, May 10, 2023

Move your Zoho mail account to Google Workspace








 Although it can be a little complex, switching from Zoho email to Google Workspace is definitely possible. The general procedures are as follows: 
 

  1. Set up your Google Workspace account: First, you'll need to sign up for a Google Workspace account and set up your domain. This will involve verifying your domain ownership and creating the necessary DNS records. 
     
     

  1. Create user accounts: Next, you'll need to create user accounts in Google Workspace for each of your Zoho email users. This can be done manually or through an automated tool like cloudasta, Advik Zoho Mail Backup Tool  
     

  1. Set up email forwarding: To ensure that no emails are lost during the migration process, you should set up email forwarding in Zoho for each user account. This will ensure that all incoming emails are forwarded to the corresponding Google Workspace email address. 
     

  1. Export Zoho emails: You'll then need to export your Zoho emails using a tool such as IMAP or POP. This can usually be done through Zoho's webmail interface or through a desktop email client like Outlook. 
     

  1. Import emails into Google Workspace: Once you've exported your Zoho emails, you can then import them into Google Workspace using the Data Migration Service (DMS). The DMS tool will walk you through the process of importing your emails, contacts, and calendar events. 
     

  1. Verify the migration: After the migration is complete, you should verify that all of your emails, contacts, and calendar events have been successfully transferred to Google Workspace. You can also verify that email forwarding has been turned off in Zoho. 


Sunday, May 7, 2023

Master the Command Prompt: Top 20 Windows Commands in 10 Minutes



Here are the top 20 Windows command prompt commands you need to know. And we're gonna do this in 10 minutes. So first, let's launch our Windows command prompt. Either hit Windows Key S or click the start menu icon and search for cmd. Right? Click that and put that sucker in a beast mode. Run as administrator.




1. ipconfig - to find your computer's IP address

2. ipconfig /all - to find your computer's IP address, Mac address, and DNS server

3. ipconfig /all | find "DNS" - to filter the output of the ipconfig /all command and see only the DNS information

4. ipconfig /release - to release the current IP address of your computer

5. ipconfig /renew - to renew the IP address of your computer

6. ipconfig /flushdns - to delete the DNS resolver cache on your computer

7. ipconfig /displaydns | clip - to copy the output of the ipconfig /displaydns command to your clipboard

8. nslookup - to troubleshoot DNS issues and find the IP address of a domain name

9. nslookup networkchuck.com - to find the IP address of networkchuck.com

10. nslookup networkchuck.com 8.8.8.8 - to find the IP address of networkchuck.com using the Google DNS server (8.8.8.8)

11. cls - to clear the screen in the command prompt

12. getmac /v - to find your computer's Mac address

13. powercfg /energy - to check for power issues with your computer

14. powercfg /batteryreport - to generate a report about your computer's battery

15. assoc - to see which file types are associated with which programs

16. assoc .mp4=vlc - to associate MP4 files with the VLC media player

17. chkdsk - to check for errors on your hard drive

18. chkdsk /f - to fix errors on your hard drive

19. chkdsk /r - to recover data from bad sectors on your hard drive

20. tasklist - to view a list of currently running processes in Windows

21. tasklist /svc - to view a list of currently running processes and their services

22. taskkill /f /im processname.exe - to forcefully end a process by its name

23. shutdown /s /t 0 - to shut down your computer immediately

24. shutdown /r /t 0 - to restart your computer immediately

25. shutdown /s /t 3600 - to shut down your computer after 3600 seconds (1 hour)

Top 5 Bluetooth Speakers Under Rs. 1500 - Quality Sound on a Budget!


 Bluetooth speakers have become a must-have gadget for music lovers who want to enjoy music on the go without the hassle of wires. However, not everyone wants to spend a lot of money on a Bluetooth speaker. If you're looking for a budget Bluetooth speaker under Rs 1500, then you have come to the right place. In this blog post, we will discuss some of the best Bluetooth speakers that you can buy under Rs 1500.

 ZEBRONICS Sound Feast 50:


The ZEBRONICS Sound Feast 50 is a rugged, water-resistant Bluetooth speaker that comes with a 14W speaker driver that delivers decent sound quality. It has a built-in microphone, so you can also take calls while using it. It comes with a 1800mAh battery that can last for up to 17 hours on a single charge. The speaker also has a microSD card slot, an AUX input, and FM radio.

 boAt Stone 352:

The Boat Stone 352 is another excellent Bluetooth speaker that you can buy under Rs 1500. It comes with a 10W speaker driver that delivers clear and loud sound. The speaker is also water-resistant and has a rugged design, making it ideal for outdoor use. It comes with a 1800mAh battery that can last for up to 12 hours on a single charge. The speaker also has an AUX input and FM radio.


Mivi Roam 2:

The Mivi Roam 2  is a compact Bluetooth speaker that comes with a 5W speaker driver that delivers clear and balanced sound. It has a built-in microphone, so you can also take calls while using it. The speaker comes with a 750mAh battery that can last for up to 12 hours on a single charge. It also has an AUX input and FM radio.

 MadRabbit Sound Rock 5W :

The MadRabbit Sound Rock   is a small and lightweight Bluetooth speaker that delivers decent sound quality. It comes with a 5W speaker driver and has a built-in microphone for taking calls. The speaker comes with a 480mAh battery that can last for up to 10 hours on a single charge.

  JBL Go 2 80 Watt Wireless:

The JBL GO Portable Wireless Bluetooth Speaker is one of the best Bluetooth speakers you can buy under Rs 1500. It comes with a 3W speaker driver that delivers clear and powerful sound. It has a built-in microphone, so you can also take calls while using it. The speaker comes with a 600mAh battery that can last for up to 5 hours on a single charge.

In conclusion, these are some of the best Bluetooth speakers that you can buy under Rs 1500. Each of these speakers offers good sound quality and comes with a built-in battery that can last for several hours on a single charge. So, choose the one that fits your budget and requirements and enjoy your favorite music on the go.

Saturday, January 11, 2020

How to Reset Jenkins Admin Password




To reset the jenkins admin password,You can simply disable the security in the config.xml file.

  • If your jenkins is running on the Linux OS, edit the below file.

vim /var/lib/jenkins/config.xml
Note: you can use you favourite text editor in place Vim

  • Search for the word <useSecurity>true</useSecurity>
and change the word true to false.



       Save The file



  • Restart the Jenkins server.

There are few ways to restart your Jenkins server


To restart Jenkins manually,
(jenkins_url)/safeRestart- Allows all running jobs to complete. New jobs will remain in the queue to run after the restart is complete

(jenkins_url)/restart- Forces a restart without waiting for builds to complete.


$ /etc/init.d/jenkins restart

$ service jenkins restart



  • Now go to the Jenkins portal again and Jenkins will not ask any credentials this time. You navigate to "Manage Jenkins" to set the administrator password again.


  •  Enable the security again by changing settings to <useSecurity>true</useSecurity> and restart the Jenkins again.

DONE

Jenkins Installation in Ubuntu 18.04


INSTALL JENKINS IN UBUNTU SERVER IN EC2 :



  • FIRST INSTALL JDK 8 ON SYSTEM:

$ sudo apt update

$ apt install openjdk-8-jdk


Set JAVA_HOME in  /etc/environment

Add this line JAVA_HOME= “/usr/lib/jvm/java-8-openjdk-amd64/”

or Simply type command export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/

Now check Java home by type

$ echo $JAVA_HOME

  • Add the Jenkins Debian repository.


wget -q -O - https://pkg.jenkins.io/debian/jenkins.io.key | sudo apt-key add -


Next, add the Jenkins repository to the system with:

sudo sh -c 'echo deb http://pkg.jenkins.io/debian-stable binary/ > /etc/apt/sources.list.d/jenkins.list'


$ sudo apt updatesudo

$ apt install jenkins



Check your jenkins is working or not

Go to the browser and type http://<ip Address of themachine>:8080

Friday, June 7, 2019

What is the difference between a backend and a front-end programming language?



Frontend Web Development.

Frontend web development, also known as “client-side” development, includes everything the user experiences directly: from text and colours to buttons, images and navigation menus. One of the objectives of designing the site are that when we open the site we see the information is in a format that is relevant and easy to read. In today’s time the devices on which the site may open have varying sizes and resolutions, therefore it’s important to ensure that the site comes up correctly on the device. We also need to ensure the correctness of the site on different browsers and operating systems.
The main languages used for Frontend Web Development are:
 HTML: It is a fundamental coding language used for creating and organising web content to be displayed in a browser.
CSS: It is a language that accompanies HTML and defines the style of a Website’s content like layout, fonts, colour etc.
JavaScript: This is a programming language for the interactive content in the website like the contact forms, dropdown menus etc..
Besides the main languages there are other languages which are used nowadays along with the main languages like Bootstrap and Angular, JavaScript libraries like jQuery etc.

Backend Web Development

The backend web development, also known as the “server-side”, is not visible. The backend of a web application is an enabler for a front end experience. It’s responsible for storing andorganising data and ensuring that the front-end actually works. The back-end of an application ensures things like calculations, database interactions, business logic and performance and communicates with the front-end, sending and receiving information to be displayed as a webpage. Whenever you interact on the website like filling up a contact form or making an online purchase, the browser send a request to the server side which in turn sends the information in the form of a front-end code which is displayed on the website. The back-end codes run on the server as opposed to the client so its important to know the programming languages, databases and server architecture to avoid slow loading of application, website crashes etc..
Since most of the codes in an application are written on the backend, therefore, it should be easy to understand and work with. The App contains the front-end code but it has to be build using a language that a database can recognise. The commonly used back-end languages are Ruby, PHP,.Net, Java and Python.

Step-by-Step Guide: How to Factory Reset Your iPhone and Restore It to Its Original Settings

  If you want to factory reset your iPhone without a passcode, there are a few different methods you can try: Method 1: Use iTunes Open iTun...